If you’re looking to enhance your biOrb aquarium’s visual appeal and add more functionality, upgrading to the biOrb MCR Lighting System is the perfect solution. The MCR (Multi-Colour Remote) lighting system allows you to choose from 16 colour options and multiple brightness levels, all controlled by a remote for maximum convenience and mood control.
This guide will walk you through what MCR lighting is, how to upgrade your current biOrb lighting setup, and which tanks it works with, so you can bring a vibrant, dynamic glow to your underwater world.
What Is biOrb MCR Lighting?
MCR stands for Multi-Colour Remote, and it’s an advanced LED lighting system developed specifically for biOrb aquariums. It allows you to:
-
Switch between 16 unique colours
-
Control brightness levels
-
Set time-controlled lighting cycles (4, 8, 10, or 14 hours)
-
Create calm or dramatic ambiance based on your décor and setting
This lighting is ideal for highlighting biOrb décor kits, colour-themed aquascapes, or simply matching your tank to the mood of the room.
What’s Included in a biOrb MCR Light Kit?
A typical MCR lighting kit includes:
-
The MCR LED light unit
-
Remote control (with colour and timer buttons)
-
Power cable and connector
-
Some models may also include a replacement light ring or hood adapter, depending on compatibility
How to Upgrade from Standard LED to MCR Lighting
Upgrading your lighting is simple and only takes a few minutes.
Step 1: Confirm Compatibility
MCR lighting is compatible with most biOrb CLASSIC, LIFE, HALO, FLOW, and TUBE models. Check the product listing or manual for size-specific guidance (15L, 30L, 60L, etc.).
Step 2: Turn Off and Unplug Your Aquarium
Always unplug your biOrb’s air pump and light from the power supply before making any changes.
Step 3: Remove the Existing Light
Depending on your model, gently remove the existing LED ring or light plate from the lid or hood. If you have an older model, you may need to remove a protective lens or adapter.
Step 4: Install the MCR Light Unit
Place the new MCR light into position. Connect the cable through the designated port and secure it with the clip or bracket provided.
Step 5: Plug In and Pair the Remote
Once installed, plug in your new MCR light and press the “On” button on the remote. You should be able to cycle through colours and brightness levels immediately.
Step 6: Set Your Lighting Schedule
Use the remote’s timer buttons (4H, 8H, 10H, 14H) to automate your lighting cycle. The light will gradually fade in and out, simulating sunrise and sunset.
Where to Buy the biOrb MCR Lighting System
You can purchase the official biOrb MCR Light Kit at Charterhouse Aquatics, where you’ll find options for all tank sizes and models. Shop confidently knowing you’re getting genuine biOrb accessories, fast UK delivery, and expert support.
Benefits of Upgrading to MCR Lighting
-
Customisable Ambiance: Set the tone in any room
-
Highlight Décor: Make plants, ornaments, and fish colours pop
-
Programmable Schedule: No need to manually turn lights on/off
-
Energy Efficient: Long-lasting LED light that runs cool
-
Safe and Seamless: Made to fit your biOrb model without modification
Troubleshooting Tips
If the light doesn’t respond:
-
Ensure the power supply is correctly connected
-
Try replacing the remote battery
-
Confirm there are no obstructions between the remote and the sensor
-
Check the light cable for damage or loose connections
Final Thoughts
Upgrading to the biOrb MCR Lighting System transforms your aquarium into a vibrant display of colour and movement. Whether you want calming blues, lively reds, or subtle warm tones, MCR lighting lets you fully control your tank’s atmosphere at the push of a button.
Browse MCR lighting kits, accessories, and replacement parts at Charterhouse Aquatics—your one-stop shop for official biOrb upgrades.
