INCLUDES 2 x PRIME 16HD LIGHTS AND MOUNTS IN WHITE/SILVER AND D-D JUMPGUARD
INNOVATIVE DESIGN BY D-D
AQUARIUM
INNOVATIVE DESIGN BY D-D
AQUARIUM
Built in low iron high clarity glass, the aquarium features a brace less design producing a clean and modern display with easy access for maintenance tasks. A standard weir box can become an unattractive focal point in any aquarium, dictating aquascaping to try and hide it and interrupting flow patterns inside the tank. With this in mind the invisible weir box of the PRO-Reef models has been carefully designed to minimise intrusion into the aquarium whilst exceeding the functionality found in most aquariums.
CABINET
The PRO-Reef cabinet is designed to be tall to perfectly balance the aquarium and comes pre-assembled, designed and built by D-D in the U.K to ensure a consistent high quality and an extremely strong cabinet. The top, bottom and main structural uprights of the cabinet are made of 36mm waterproof board providing rigidity, excellent load bearing properties, giving the impression of a piece of furniture rather than just another tank cabinet.
The tall cabinet provides good headroom for the use of taller equipment and ease of maintenance. When installing an aquarium it is of the upmost importance to provide a level base, unlevelled cabinets can stress the glass and can result in an uneven water level in the aquarium. The D-D aquarium cabinet design includes heavy duty adjustable feet allowing for accurate leveling of the cabinet and aquarium.
SUMP
There are as many ideas about sump design as there are hobbyists. D-D have many decades of experience in designing, building and running large successful aquariums and have combined this knowledge to produce what they believe is the perfect sump layout for the space available.
The ultra-quiet twin pipe weir system is further refined at the sump level by including a section whereby the pipes are completely submerged resulting in a silent water return into the sump with no splashing or gurgling.
The water from that section overflows through twin filter socks which incorporate a diffused silencer plate to silence any water noise. From there the filtered water flows into two large equipment compartments. These chambers can both hold equipment such as skimmers, media reactors, calcium reactors etc. or you can use one chamber as a refugium with caulerpa/cheato. Here again there is flexibility to alternate these sections for those who prefer to skim before or skim after the refugeum.
The final section is a generous sized return pump compartment which sits beside the integrated water top off reservoir located to the side of the sump
SPECIFICATION
OVERALL DIMENSIONS L x W x H (cm) 90 x 61 x 148
CABINET - 90 x 61 x 102 (cm)
AQUARIUM - 90 x 61 x 46 (cm)
SUMP – 67.5L x 46W x 38T (cm)
SYSTEM VOLUME 290 Litres
AQUARIUM VOLUME 225 litres
Prime 16HD Lighting
D-D Jumpguard
There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet. Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration. The new Jumpguard Pro now includes cutout and brace bar parts as standard and an aesthetic black mesh.
SPECIAL CORNERS INTEGRATE WITH SILICONE JOINTS
The lower section of the corners is specifically designed so that it does not interfere with the silicone bead in the corners of your tank which gives a tight fit to the glass with no gaps. It also makes it easier and neater to cut off the corner if you want to bring wires out at the back of the tank for pumps and heaters.
NEW BLACK MESH WITH MAXIMUM LIGHT PENETRATION
For those concerned with loss of light penetration into your reef tanks, we tested light levels with a Apogee MQ-200 meter and got the following results:
PAR without cover around 390 - 400 • PAR with cover around 380 - 390 • Approximately a 2.5% reduction in light with no shadowing at all.
Prime 16HD Lighting
Prime™ 16HD Reef
Huge Light in a Tiny Package
Huge Light in a Tiny Package
HD Power
No longer are you limited to using a fixed amount of power per channel, the Prime 16HD dynamically adjusts power available to each color, borrowing power from the colors you’re not utilizing. Giving you the most vivid spectrum your tank has ever seen.HD Spectrum
The Prime 16 HD Series is capable of producing a limitless number of spectral combinations to fit your tank’s exacting needs.Dedicated Moonlight
A dedicated moonlight channel simulates natural lunar color and intensity.The newest innovation in the Prime line from AquaIllumination®, the Prime 16 HD Series brings more power and color where you want it, plus the freedom to use your smartphone or computer as a controller.
SIMPLE BUILT-IN CONTROL
Control on the lights will use the existing myAi app which is free, simple and very quick to program offering onsite direct BLE connection through your smart mobile device. Additional control options may become available for the new generation Hydras over time.
Control on the lights will use the existing myAi app which is free, simple and very quick to program offering onsite direct BLE connection through your smart mobile device. Additional control options may become available for the new generation Hydras over time.
Schedule Mode - The intuitive schedule mode is so easy to program you’ll have plenty of time for more important tasks, like enjoying your corals.
Easy Setup - Want an even easier way to program your lights? Your covered. The Easy Setup wizard is a breeze.
Acclimation - Installing new equipment can be stressful for your livestock. Acclimation mode provides the gentle transition they need to adapt and thrive.
Manual Mode - Kelvin Set your lights to the exact colour temperature your corals need with the handy Kelvin wheel. Then set the intensity with the inner wheel.
Power Output
With a spread of 24? x 24?, the AI Prime® 16HD has a peak PAR of 100µMol at a depth of 24 inches, more than enough for your hungriest of livestock. Drawing a maximum of 55 watts from the wall, it follows in the family’s efficient footsteps.
Optics
The AI Prime® 16HD comes standard with TIR lenses giving you the best balance of power and spread. Our lens optics are custom designed, boasting greater than 90% optical efficiency and including a diffuse exit surface to provide improved color blending.
Led's
The AI Prime® 16HD utilizes the latest LED technology from leading manufacturers, arranged to provide the best performance.
Easy Setup - Want an even easier way to program your lights? Your covered. The Easy Setup wizard is a breeze.
Acclimation - Installing new equipment can be stressful for your livestock. Acclimation mode provides the gentle transition they need to adapt and thrive.
Manual Mode - Kelvin Set your lights to the exact colour temperature your corals need with the handy Kelvin wheel. Then set the intensity with the inner wheel.
Power Output
With a spread of 24? x 24?, the AI Prime® 16HD has a peak PAR of 100µMol at a depth of 24 inches, more than enough for your hungriest of livestock. Drawing a maximum of 55 watts from the wall, it follows in the family’s efficient footsteps.
Optics
The AI Prime® 16HD comes standard with TIR lenses giving you the best balance of power and spread. Our lens optics are custom designed, boasting greater than 90% optical efficiency and including a diffuse exit surface to provide improved color blending.
Led's
The AI Prime® 16HD utilizes the latest LED technology from leading manufacturers, arranged to provide the best performance.
- 4 – Cool White
- 4 – Blue
- 4 – Royal Blue
- 1 – Photo Red
- 1 – Green
- 1 – Violet
- 1 – UV
- 1 – Moonlight
Max Wattage - 55W
Channels - 7 (+1)
LED's 16 (+1)
LED's 16 (+1)
Length 4.88in. (12.4cm
Width 4.88in. (12.4cm)
Height 1.42in. (3.6cm)Soft Coral/LPS/SPS - 20 x 20in. (50 x 50cm)
High Density SPS - 16 x 16in. (40 x 40cm
D-D Jumpguard
There is nothing worse than coming down in the morning to finding your favourite fish lying dead and crispy on the carpet. Many fish, especially wrasse, have a tendency to jump from the tank when frightened or chased by another fish and so a solution to preventing the loss of such fish should be high on every fish keepers priority list.D-D Jumpguard covers are a very lightweight, sleek, low visual impact and easy to construct screen cover suitable for most aquarium types, specifically designed to prevent fish loss due to jumping whilst maintaining high light penetration. The new Jumpguard Pro now includes cutout and brace bar parts as standard and an aesthetic black mesh.
Included in the kit
The Jumpguard Pro Aquarium Cover is a kit of parts which allows the aquarist to create a custom frame for their specific aquarium. The rigid corners and extruded aluminium section create a very solid frame which sits neatly inside glass of the aquarium glass, resting on the top lip.
Kit Contents:
The special extruded aluminium profile is now shaped with a lip which sits directly onto the edge of the glass, removing the requirement for any additional clips or brackets. The section is extruded then powder coated in a tough, low sheen, black finish for greater scratch resistance and greater aesthetics.Kit Contents:
- 4 x Aluminium frame sections
- 4 x Plastic corners
- 2 x Plastic handles
- 1 x Length of rubber spline
- 1 x Sheet of black mesh
- 1 x Spline roller tool
- 1 x Instruction manual
- 2 x Reverse corners to form flexi-cutout
- 1 x Brace bar
SPECIAL CORNERS INTEGRATE WITH SILICONE JOINTS
The lower section of the corners is specifically designed so that it does not interfere with the silicone bead in the corners of your tank which gives a tight fit to the glass with no gaps. It also makes it easier and neater to cut off the corner if you want to bring wires out at the back of the tank for pumps and heaters.
NEW BLACK MESH WITH MAXIMUM LIGHT PENETRATION
For those concerned with loss of light penetration into your reef tanks, we tested light levels with a Apogee MQ-200 meter and got the following results:
PAR without cover around 390 - 400 • PAR with cover around 380 - 390 • Approximately a 2.5% reduction in light with no shadowing at all.
