5000ml Bundle Offer
1 x 5000ml ALK/PH+ & 1 x 5000ml CA/MG+, get FREE:
-
1 x Elements 1 (250ml)
-
1 x Elements 2 (250ml)
-
1 x Elements 3 (250ml)
Nyos lonB Alk/pH+
Increases alkalinity and pH value
The Nyos® ION-B system provides you with a perfectly coordinated, state-of-the-art supply system for modern saltwater aquariums. The system is simple and intuitive and can be individually adapted to the needs of your aquarium.
With just two solutions you can:
- Replace used calcium, magnesium and alkalinity
- Perform an ion balance
- Stabilize the pH value in the range 8.0-8.3
- Replace and adjust all required trace elements according to consumption
2,000ml canister contains 20,000 dKH
ION-B ALK/PH+ liquid is a concentrated ready-to-use solution for increasing alkalinity (carbonate hardness) and stabilizing the pH value. It is part of the Nyos® ION-B method.
- Ready-to-use solution, no mixing necessary
- Increasing alkalinity and pH stabilization
- Also contains sulfate, bromine and fluorine for ion balance
Application:
- Adjust the dosage to balance the daily consumption of dKH.
- One liter of ION-B ALK/PH+ contains approx. 10,000 dKH
- Guideline for dosage: 5-10ml/day per 100 L aquarium water
Notes:
- Alkalinity and calcium are consumed by corals in a ratio of about 1:7. The ION-B solutions are also in a ratio of 1:7, so you can usually add identical amounts of both solutions
- Crystallization at low temperatures is not critical and disappears again when the temperature rises
Nyos lonB Ca/Mg+
Increases calcium and magnesium
The Nyos® ION-B system provides you with a perfectly coordinated, state-of-the-art supply system for modern saltwater aquariums. The system is simple and intuitive and can be individually adapted to the needs of your aquarium.
With just two solutions you can:
- Replace used calcium, magnesium and alkalinity
- Perform an ion balance
- Stabilize the pH value in the range 8.0-8.3
- Replace and adjust all required trace elements according to consumption
2,000ml canister contains 144,000 mg Ca
ION-B CA/MG+ liquid is a concentrated ready-to-use solution for increasing calcium and magnesium. It is part of the Nyos® ION-B method.
- Ready-to-use solution, no mixing necessary
- Increase in calcium and magnesium
- Also contains magnesium, strontium, potassium and boron for ion balance
Application
- Adjust the dosage to balance the daily consumption of Ca.
- One liter of ION-B CA/MG+ contains approximately 72,000 mg Ca
- Guideline for dosage: 5-10ml/day per 100 L aquarium water
Notice
Alkalinity and calcium are consumed by corals in a ratio of approximately 1:7. The ION-B solutions are also in a ratio of 1:7, so you can usually add identical amounts of both solutions.
INCLUDES FREE ELEMENTS 1, 2 and 3
Nyos IonB Ion Elements 1 Ca/Mg
Trace elements with molybdenum, rubidium and strontium
The necessity of using trace elements has been known in marine aquaria for decades.
The introduction of modern water analysis offers completely new possibilities for monitoring the consumption of trace elements in saltwater aquariums. In the process, new insights have also emerged into which trace elements are relevant and in what proportion they are consumed. Important individual elements such as vanadium, rubidium or selenium were often neglected in the past. It is also now known that certain elements such as iron and zinc must be specially stabilized, otherwise they are not available.
This is exactly where the new Nyos® ION ELEMENTS 1 CA/MG, 2 CA/MG, 3 ALK/PH come into play:
- State-of-the-art trace element mixtures developed based on real consumption values of modern reef aquariums
- All-round supply of all important trace elements including vanadium, selenium, rubidium
- “Fast-volatile” elements such as iron or zinc are stabilized and directly available
- Individual adaptation to the consumption of your aquarium
- Easy dosing by adding to the Nyos® ION-B CA/MG and ALK/PH solutions
Nyos® ION ELEMENTS 1 CA/MG is a state-of-the-art trace element mixture developed on the basis of real consumption values of modern reef aquariums. It contains the following coordinated and directly available individual elements: molybdenum, rubidium, strontium.
- State-of-the-art trace element mixtures developed based on real consumption values of modern reef aquariums
- all-round supply of all important trace elements
- Elements are stabilized and directly available
- Individual adaptation to the consumption of your aquarium
- Easy dosing by adding to the Nyos® ION-B CA/MG solution
Application:
Nyos® ION ELEMENTS 1 CA/MG is not added to the aquarium, but to the Nyos® ION-B CA/MG solution. The target dosage is 20ml per liter of Nyos® ION-B CA/MG. To get a feel for your aquarium's needs, start with 10ml and then increase the value continuously over 2-4 weeks until your trace element levels are in the target range. For monitoring purposes, we recommend regular ICP analysis of your aquarium.
A notice:
If no trace elements have been added to your aquarium in the past, it may take some time before the increase in trace element concentrations becomes noticeable.
Nyos IonB Ion Elements 2 Ca/Mg
Trace elements with chromium, iron, cobalt, copper, manganese, nickel, vanadium, zinc
The necessity of using trace elements has been known in marine aquaria for decades.
The introduction of modern water analysis offers completely new possibilities for monitoring the consumption of trace elements in saltwater aquariums. In the process, new insights have also emerged into which trace elements are relevant and in what proportion they are consumed. Important individual elements such as vanadium, rubidium or selenium were often neglected in the past. It is also now known that certain elements such as iron and zinc must be specially stabilized, otherwise they are not available.
This is exactly where the new Nyos® ION ELEMENTS 1 CA/MG, 2 CA/MG, 3 ALK/PH come into play:
- State-of-the-art trace element mixtures developed based on real consumption values of modern reef aquariums
- All-round supply of all important trace elements including vanadium, selenium, rubidium
- “Fast-volatile” elements such as iron or zinc are stabilized and directly available
- Individual adaptation to the consumption of your aquarium
- Easy dosing by adding to the Nyos® ION-B CA/MG and ALK/PH solutions
Nyos® ION ELEMENTS 2 CA/MG is a state-of-the-art trace element mixture developed on the basis of real consumption values of modern reef aquariums. It contains the following coordinated and directly available individual elements: chromium, iron, cobalt, copper, manganese, nickel, vanadium, zinc.
- State-of-the-art trace element mixtures developed based on real consumption values of modern reef aquariums
- all-round supply of all important trace elements
- Elements are stabilized and directly available
- Individual adaptation to the consumption of your aquarium
- Easy dosing by adding to the Nyos® ION-B CA/MG solution
Application:
Nyos® ION ELEMENTS 2 CA/MG is not added to the aquarium, but to the Nyos® ION-B CA/MG solution. The target dosage is 20ml per liter of Nyos® ION-B CA/MG. To get a feel for your aquarium's needs, start with 10ml and then increase the value continuously over 2-4 weeks until your trace element levels are in the target range. For monitoring purposes, we recommend regular ICP analysis of your aquarium.
A notice:
If no trace elements have been added to your aquarium in the past, it may take some time before the increase in trace element concentrations becomes noticeable.
Nyos IonB Ion Elements 3 Alk/pH
Trace elements with fluorine, iodine, potassium, selenium
The necessity of using trace elements has been known in marine aquaria for decades.
The introduction of modern water analysis offers completely new possibilities for monitoring the consumption of trace elements in saltwater aquariums. In the process, new insights have also emerged into which trace elements are relevant and in what proportion they are consumed. Important individual elements such as vanadium, rubidium or selenium were often neglected in the past. It is also now known that certain elements such as iron and zinc must be specially stabilized, otherwise they are not available.
This is exactly where the new Nyos® ION ELEMENTS 1 CA/MG, 2 CA/MG, 3 ALK/PH come into play:
- State-of-the-art trace element mixtures developed based on real consumption values of modern reef aquariums
- All-round supply of all important trace elements including vanadium, selenium, rubidium
- “Fast-volatile” elements such as iron or zinc are stabilized and directly available
- Individual adaptation to the consumption of your aquarium
- Easy dosing by adding to the Nyos® ION-B CA/MG and ALK/PH solutions
Nyos® ION ELEMENTS 3 ALK/PH is a state-of-the-art trace element mixture developed on the basis of real consumption values of modern reef aquariums. It contains the following coordinated and directly available individual elements: fluorine, iodine, potassium, selenium.
- State-of-the-art trace element mixtures developed based on real consumption values of modern reef aquariums
- Elements are stabilized and directly available
- Individual adaptation to the consumption of your aquarium
- Easy dosing by adding to the Nyos® ION-B ALK/PH+ solution
Application:
Nyos® ION ELEMENTS 3 ALK/PH is not added to the aquarium, but to the Nyos® ION-B ALK/PH+ solution. The target dosage is 20ml per liter of Nyos® ION-B ALK/PH+. To get a feel for your aquarium's needs, start with 10ml and then increase the value continuously over 2-4 weeks until your trace element values are in the target range. For monitoring purposes, we recommend regular ICP analysis of your aquarium.
A notice:
If no trace elements have been added to your aquarium in the past, it may take some time before the increase in trace element concentrations becomes noticeable.