REEFER G3+ systems come with elegant jet-black eurobracing, ultra-clear glass bonded with high-quality euro-silicone, a high-precision gate valve, hydrodynamically superior piping, and are fully supported by reinforced marine-spec cabinets. They also include the advanced ReefControl ATO module, the base for all your aquarium monitoring needs. REEFER G3+ systems come with an extended warranty of up to 5 years.
Make a large reef the centrepiece of your room with a 200 cm Peninsula display, two long viewing sides and a flexible split sump. The Red Sea REEFER Peninsula S-950 G3+ combines a 757 litre display with an in-cabinet sump, providing a manufacturer-rated total system water volume of 947 litres. Its 200 x 68 x 65 cm display gives you a defined space to plan rockwork, coral placement and swimming areas. As part of the G3+ range, it brings together the aquarium, cabinet, sump, plumbing and automatic top-up controls in a reef-ready foundation that you can equip to suit your reef.
Ultra-clear glass provides a clear view of your aquascape, with 19 mm front glass and 19 mm side glass. High-quality euro-silicone bonds the glass, while the black eurobracing reinforces the aquarium alongside additional bottom bracing. The cabinet uses a marine-spec anodised aluminium frame with replaceable exterior panels and concealed adjustable feet. A slide-out control panel provides an accessible mounting area for controllers and other equipment, helping you organise the hardware beneath the display.
The G3+ water-management design uses hydrodynamic piping and the ReefGate precision gate valve. Adjusting the downflow through the valve helps you balance the drain against your chosen return pump and reduce operating noise. The enlarged downflow inlet is designed to reduce turbulence, while the removable surface-skimming combs make the overflow easier to clean. This model has two 25 mm return outlets and supports single- or dual-pump plumbing configurations. Side-mounted returns direct water along the Peninsula display, helping distribute the returning flow towards the far end of the aquarium.
The in-cabinet sump places filtration equipment below the display. Its adjustable-height skimmer chamber lets you set the operating water depth to suit the requirements of your chosen protein skimmer. The mechanical filtration section includes two filter socks and two media cups. The removable mechanical filtration compartment makes the sump ReefMat-ready, so you can add a compatible automatic roller filter as an upgrade. A refugium-ready layout also gives you the option to incorporate a refugium into your filtration plan. The split-sump extension offers further flexibility: use it for a refugium, frag tank or extra filtration, or disconnect it for use as an RO reservoir or for water changes.
ReefControl Pro and the ATO Module are included. Automatic freshwater top-up replaces water lost through evaporation, helping maintain the system water level and salinity, while integrated temperature monitoring supports day-to-day checks. The Pro controller supports up to seven ReefSense probes or sensors and two 12 V DC devices. You can expand monitoring and control with optional compatible ReefSense devices and ReefControl Power as your setup develops.
The Peninsula layout presents the reef through both long viewing panels, making it suitable as a room divider or freestanding focal point. Cabinet doors can be fitted on the left or right to suit the room layout and provide practical sump access.
Technical specifications
|
Specification
|
Details
|
|
Total system water volume
|
947 litres
|
|
Display tank water volume
|
757 litres
|
|
In-cabinet sump water volume
|
189.6 litres
|
|
Display dimensions L x W x H
|
200 x 68 x 65 cm
|
|
Total system height
|
165 cm
|
|
Front glass thickness
|
19 mm
|
|
Side glass thickness
|
19 mm
|
|
Bottom glass thickness
|
19 mm
|
|
Return outlets
|
2 x 25 mm (Single or dual pump)
|
|
Skimmer chamber footprint
|
48 x 51 cm
|
|
Pump chamber footprint
|
28 x 28 cm
|
|
Sump operating water height
|
21-27 cm
|
|
ReefControl controller
|
Pro with ATO Module
|
|
Refugium-ready sump
|
Yes
|
|
Split sump
|
Included
|
|
Mechanical filter socks
|
2
|
|
Media cups
|
2
|
|
Cabinet frame
|
Anodised aluminium
|
|
Slide-out control panel
|
Included
|
|
Manufacturer warranty
|
3 years; extended to 5 years with registration within 90 days, subject to terms
|
+1
+1
+1
+1
+1
+1
+1
+1
+1
+3
